Re design VS Alt pin locations

[Gordy #21004]

Pins on the way

[jshrack]

New pin location for 1?!?

[psychodwarf]

Originally Posted by jshrack

New pin location for 1?!?

about 50 feet from where it is at,over by the rocks

[jshrack]

I know where the hole was already dug...
I didn't know it was authorized though.
That is sweet to hear!
Need any help putting it in?

[psychodwarf]

just waiting on new pin for it .as for it being authorized not sure but there was at least 2 board members there when work was done on hole #2 AND there is a safety issue with #1 and hole #11 so as far as i know that is why the hole for #1 is dug to move it back away from #11`s fairway

[Sky Pilot]

Read the Charter

[psychodwarf]

Originally Posted by Sky Pilot

Read the Charter

sure if i knew where you put it .

[Yoduh]

I needs to be moved because it isn't safe and because it's really lame, compared to old hole 1.

[Gordy #21004]

Move the pad or move the pin or both. When this gets done it will be our first pair of twin pads and twin pins. Hope ya'all like the alt. pin position.

[Timber]

Originally Posted by psychodwarf

sure if i knew where you put it .

http://www.sdga.us/about/

[psychodwarf]

Originally Posted by Sky Pilot

Read the Charter

ok jeff i read the charter still dont know why you wanted me to look it up .It had nothing to do with the subject that was being talked about ? care to explain ?

[Sky Pilot]

Ah, just forget it.

SP

[jshrack]

You guys talkin' alt pad for #1 too?
When did this happen?
Was a new 18 pad part of this discussion too?
I see things are started...
Sounds like fun, lemme know if you need labor before the snow.



As for Jeff's remark, I believe he was referring to the need for a Board vote to validate any club/coordinator decision.

[psychodwarf]

Was a new 18 pad part of this discussion too

?
NO there is nothing wrong with 18`s tee pad .

You guys talkin' alt pad for #1 too?

that is a thought right now but i think it will be 11`s tee pad that gets moved back (again working on the safety issue`s) we have also brought timbers for erosion work on hole #4 and for making of stairs from the bottom of the hill by tee pad#4 going up to hole #10.

As for Jeff's remark, I believe he was referring to the need for a Board vote to validate any club/coordinator decision.

then he might just as well have said that because the charter does not mention that.

[Sean Johnson]

I think that Jshrack is referring to the fact that someone has dug out what appears to be an alternate teepad for 18. They didn't get very far along, but it definitely looks like the beginning of a teepad.

[psychodwarf]

Originally Posted by Sean Johnson

I think that Jshrack is referring to the fact that someone has dug out what appears to be an alternate teepad for 18. They didn't get very far along, but it definitely looks like the beginning of a teepad.

THAT ONE WAS NOT A CLUB PLANNED ONE. that one has been filled in but we are still VERY dissappointed at ALL the small CUT trees someone has DECIDED to trim down to the ground ..

[Wobbly Bob]

We had a good day at Downriver yesterday and accomplished a few things on Jon's list.

• Moved the tee-sign from old #3's tee-box to #3's new position.
• Installed a bench at #3.
• Installed a timber on the downside of #15's tee-box to reduce erosion.
• Installed a bench at #15.
• Utilized the old picnic table top for a bench on #2.
• Repaired 2 areas of vandalism.
• Recovered the anchor from old #12.

Thanks to Jon Verbarg, Joe Barnett and Gordy Crafts for these improvements.

[Burge]

Originally Posted by Wobbly Bob

Recovered the anchor from old #12.

Goodbye old #12, Woe! The days of throwing from the pit over the hill of death are gone!

[jshrack]

Originally Posted by psychodwarf

THAT ONE WAS NOT A CLUB PLANNED ONE.

Maybe giving our members input on the planning process would circumvent some of these issues?


Also, was there a work party?
I know I would have gotten my hands dirty if I had heard anything.

[psychodwarf]

Maybe giving our members input on the planning process would circumvent some of these issues

from what i have learned IT was a club member who took it upon themselves to make a new tee pad because THEY were`nt happy with the one that was there.