The overall frame is 12' long with a space for the tee pad about 9 1/2' and about 22" for either pavers or an additional piece of pad for the follow-thru up front. Separating these two sections is a piece of 4x6 on the flat to absorb the brunt of the follow thru. The overall frame is meant to be flush with grade. The pad and follow thru area are also meant to be flush with the frame; not over it. If the front of this built up area needs to be retained (like hole #2) we will do so. We will also sculpt out the area behind the tee to provide a walk-up and smooth transition onto the tee surface. We intend to have this tee in finished condition by the Cup.