Highbridge work party
 

is there any hope to fix any of the tee pads that have drop-offs in front of the tee pad? holes 2, 8, 9, 10, 13 (especially 13), 15, 16? they all have ankle breakers at the end of the rubber tee pad.

Saturday we will be working on the Spokane Parks Foundation Project for accessibility and erosion control. If you wanted to show up and help, you could be in charge of getting the ankle breakers filled. We'll have gravel.

7KW
 

The generator will be on the truck.:shooting:

thank you
 

I would like to thank the volunteers that help build the stairs on 2 John, Edger, Dave, Joe, Jerrome, Don, Gordy, Leslie, Jamie. Thank you Jamie for buying burgers for everyone. Thank you Lisa for bring food and Leslie for bring coffee. Thanks everyone for surviving in the rain all day and enduring the wind to help put all those stairs in. There will be more work parties to come at High Bridge and hopefully next time it wont be pouring rain. :biggrin2: :biggrin2: :biggrin2:

And thank you for all your efforts and organization to get the job done. It was a pleasure helping out. A job well done !

Had fun. glad to be part of a project I have been hoping for a while. Now SDGA member to boot(also been meaning to for a while). Good to meet Joe, Kevin ,John and everyone else. Great to work with Joe and Dave(we did a fair chunk of the 1st run, then they helped with second 2. I put my ocd to good use tamping. :-)
Everyone who showed was way cool and busted their butts in the rain to improve the course. I'll be proud to be able to look at those for years and know I helped.

Pretty impressive...
 

The progress a dozen dedicated, positive, cooperative, constructive people can make is just down right amazing. Kevin you did a very fine job as a foreperson getting everyone involved and keeping the tasks moving forward so well. It was HARD work and the rain was misereable...however, I'm so happy I was able to put 3 and a half hours in. My hat is off to the rest of you who worked solid for over 8 hours.

This was a remarkable work party and I can't wait to see the finished product.

I'll definitely have a new smile everytime I climb those stairs on hole 2 in the future...

Thank you EVERYONE!!

P.S. I sent the pictures I took to Bob...and Joe if you did get a pic of me swinging that sledge hammer, you can go ahead and delete it!! :-)

Unbelievable...
 

So I cruised by the park last night when I got off work. I couldn't believe how FULL HighBridge was at 7:00 on a Monday night!! I took some photos of the finished steps. I gotta say that it had to be a herculean effort to get the rest of that project done. I left at 1:30 and the upper stairs were marked off but no digging had begun. Did you guys stay there all night?

It looks magnificant!! Truly amazing. I'm so proud I had a small hand in helping out on that project.

:bowing:

Everyone but me went up to those about then. Finished by about 4 or 4:30. Had process worked out so went quicker than 1st 2.

Please send me photos of finished project. Maybe from the top looking down.

Working on the lower set of platforms.

http://www.nwdiscgolfnews.com/forum/attachment.php...2&d=1339537151

And staying out of the rain.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339537262

Assembling platforms?

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339537490

In the rain. Check out the new SDGA Generator.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339537612

Did we make enough of these things?

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339537612

Let's drive these up to the next level.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339538314

Perfectly laid out.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339538314

Maybe we should go play a hole?

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339538314

No the third tier is waiting for us.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339538314

Back filling the second tier.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339538314

Kevin hiking it up the hill.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339539240

I'm short one of those platforms, where did it go?

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339539692

A mini ramp leading to the platforms.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339539240

All it needs is the gravel.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339539240

Wow, it turns half way up!

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339539240

Same ramp.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339540022

We're almost finished.

http://www.nwdiscgolfnews.com/forum/attachment.php...1&d=1339540022

Feel free to download any of these attachments.

I've said it once and I'll say it again. All involved did an awesome job. After 2's steps, what's the next phase of erosion control?

That looks amazing! Nice work SDGA and all who helped. Looks so nice I may have guessed the NIDGC did it.:biggrin2:

Next up for improvement
 

The climb up #9, the climb down #6 and the climb up between #7 & #8.

Throw me a rope!
 

Climb on #9 is the worst, imho, and should be considered for the next attack.

On the way
 

Bob,

I'm emailing the 7 pics I took Monday...

Thanks for posting :-)